| |
|
| |
|
| |
 |
Why
dry...? |
Improvement
for your bottom line. |
| |
| EXPERIENCE
THESE BENEFIT WITH SHOTBEADS |
- No more olly scrap means higher yield on reprocesessed
metal. Saving can reach 0.2% of your total metal costs.
Re-melt gates and runners with minimal smoke.
- Less porosity: SHOTBEADS will reduce troublesome porosity
simply because there is less gassing, resulting in tighter
metal grain, stronger casting and reduced hard sports.
- Die cavity area stays cleaner. Less downtime to clean
carbon buildup caused by oily-based plunger lubes.
- Eliminate oily plunger lube waste-water treatment
costs.
- Extended tip life means less downtime. Up to 50% improvement
over most straight oils and 5 times the tip life compared
with water-based plunger lubes.
- Increased shot velocity. Friction reducing additives
give up to a 10% increase in slow shot velocity and
up 20% on fast shot. Prove it with your shot monitor.
- Cleaner machines. There is no waste. The casting totaly
consumes all material.
- No mess on the back of the machines.
- Clean, bright castings. No oily flow marks in the
castings. Compare and see!.
- Cleaner floors and cellings. Minimal smoke. SHOTBEADS
keep the whole die cast area cleaner.
- Cast at lower metal temparatures. SHOTBEADS will not
cool the metal in the shot sleeve like conventional
oils. You can lower the melting pot tenperature by 10
degrees and still hold the same casting temperature.
- Fewer environmental headaches with less oil mist and
waste.
- Reduce release agent spray time.
|
| |
|
 |
|
For more
information:
PT Prima Tigon
Jln Hayam Wuruk 32 P
Jakarta 10120, Indonesia
Phone: (62-21) 345 9511
Fax: (62-21) 345 8316
|
|
|
|
